Table of Contents
Advertisement
Alarm Message to Voice or E-mail
Alarm Message to Web Server
Alarm Acknowledgement
Programming Parameter Read or Write
Machine-to-Machine Command
Status Refresh to the Web Page
Programming Refresh to the Web Page
The last item, Programming Refresh to the web, depends on how
many changes were made since the last update. Only items that have
changed will be sent. Typically, once the unit has been programmed,
additional programming changes are minimal. However, if you were
to completely reprogram the unit and change every parameter, then
the maximum number of data messages would be transmitted.
Technical Support
This instruction manual will help you install and program the
Skymetry WTU-14 properly. Be sure to read it completely before
beginning the installation process. If there are any questions or
problems that arise upon installation or operation, please contact our
Technical Support team:
PHONETICS, INC.
901 Tryens Road
Aston, PA 19014
Phone: 610.558.2700
FAX: 610.558.0222
support@sensaphone.com
Chapter 1: Introduction
1–4
1
1
2
1
5–7
9 to 115
19
Advertisement
Table of Contents
