How To Connect And Wire Field Devices To The I/O Boards - Toptech MultiLoad II DIV-2 Installation Manual

5.4

How to Connect and Wire Field Devices to the I/O Boards

In this section of the chapter we will provide examples of commonly used devices that can get wired to
the I/O boards. This is not an exhaustive listing, but intended to provide you an example of how certain
types of I/O need to get wired into the various boards.
MultiLoad II Wiring Examples:
o Flow Meter and Control Valve
o Additive
o RTD
o Analog In & Analog Out
o AC Output Wiring
o AC Input Wiring
o DC Input Wiring: Permissives/Status
o DC Output Wiring
o 2 Output Air Eliminator Wiring
o Remote Display Wiring
RCUII Wiring Examples:
- DC Input Wiring
-
AC: DC Output wiring
Typical Example:
-
Typical single meter example
35