Assign A Patient To A Room; Review Patient Alarms - Welch Allyn Connex Directions For Use Manual

Directions for use
2. Drag the patient tile to a new location.
3. Click OK at the Confirm Patient Transfer dialog box.
The patient tile moves to the new location.

Assign a patient to a room

Note
1. Click and drag a patient tile from the Waiting area to the appropriate room.
The Confirm Patient dialog box appears.
2. Click OK to confirm the transfer.
The patient tile appears in the room area.
3. Click the patient tile.
The Device Details window appears.
4. Click Edit.
The Patient Details window appears.
5. Enter the patient's ID, name, date of birth, and other information.
6. Click the Room / Bed pull-down menu and select the appropriate room or bed.
7. Click Save.
The Confirm Changes dialog box appears.
8. Review the information in the dialog box, and if correct, click Yes to return to the
Main Monitoring screen. If further editing is required, click No to return to the
previous screen.

Review patient alarms

1. Click on a patient tile.
The Device Details window appears.
2. Click Review.
The Patient Review window appears.
3. Click Patient Alarms.
The Patient Alarms tab appears.
Note
This feature is only available in a Mapped by patient location layout.
If your main central station PC disconnects and is replaced
with a warm spare — an additional, central station-capable
PC running on the network — historical continuous data and
alarms will not transfer to the new central station PC. Some
continuous trend data and episodic data generated before
the disconnect will show up on the new central station PC.
Patient data management 49