Welch Allyn Connex Directions For Use Manual page 67

Directions for use
Technical alarms
Technical alarms occur when a problem occurs with such things as the patient device,
the patient location or ID, an accessory connected to the patient device, or the network.
1.
System message area. If multiple alarms are active, click
alarm.
2. Patient tile. If a patient tile is in a technical alarm state, the border around the tile changes to a color relative to
the level of the alarm. No colored borders appear around the patient's parameters.
Main Monitoring screen notifications
Notification
System message area
Patient tile
Description
The area changes color and displays a message with an accompanying status icon or
button.
If multiple alarms and information messages are active, the System message area shows
the highest priority alarm. If the alarms are equal in priority, the most recent alarm
message appears. You can cycle through the messages for each active alarm.
The border color changes. Click the alarming tile to pause an alarm audio tone. Visual
indicators persist during an audio-paused condition.
to cycle through the messages for each active
Alarms 61