Tile-Dragging Behavior - Welch Allyn Connex Directions For Use Manual

20 Screen elements

Tile-dragging behavior

The following table describes actions in the three tile layout modes. An empty position
on the grid is a blank area with no tiles. An empty room tile represents a room that has
no patient or data assigned to it.
Action
Move tiles within the
patient data area to an
empty grid position
Move tiles within the
patient data area to an
empty room tile
Move tiles within the
patient data area to an
already-assigned tile
Move tiles from the
waiting area to an
empty position on the
grid.
Move tiles from the
waiting area to an
empty room tile
Move tiles from the
waiting area to an
already-assigned tile
New tile appears,
known location
New tile appears,
unknown location
Mapped mode Manual mode
Not supported Changes tile position
Assigns a monitor or a Not supported. There are no
patient to the new location empty room tiles in manual
mode
Assigns a monitor or a Not supported
patient to the location
If a previously assigned tile is
connected to a continuous
monitor, this action assigns
the new device and patient to
the location and moves the
previous device and patient
to the waiting area.
Not supported The tile moves to the position Not supported
Assigns a monitor or a Not supported. There are no
patient to the location empty room tiles in manual
mode
Assigns a monitor or a Not supported
patient to the location
If a previously assigned tile is
connected to a continuous
monitor, this action assigns
the new device and patient to
the location and moves the
previous device and patient
to the waiting area.
Tile appears in main tile area Tile appears in waiting area
Tile appears in waiting area Tile appears in waiting area
®
Welch Allyn Connex Central Station
Automatically sorted mode
Not supported
Not supported. There are no
empty room tiles in sorted
mode.
Not supported
Not supported. There are no
empty room tiles in sorted
mode.
Not supported
Tile appears in waiting area
Tile appears in waiting area