Connect An Episodic Device To The Central Station - Welch Allyn Connex Directions For Use Manual

46 Patient monitoring

Connect an episodic device to the central station

1. Enter the patient information at the central station.
Note
2. Make sure that the device is connected to the same network as the central station
by checking for the radio signal strength indicator on the device. For more
information, see the device directions for use.
3. Admit the patient as described in the Patient data management section.
The patient tile appears in the Main Monitoring area.
Patient information must be entered at the central station
before a patient tile appears in the Waiting area.
®
Welch Allyn Connex Central Station