Alarm Limits Tab - Welch Allyn Connex Directions For Use Manual

Directions for use

Alarm limits tab

1. This area displays the patient summary.
2. This area allows you to set both the high and low limits for the parameter alarm. You can adjust the limits by doing
any of the following:
•
•
•
The default alarm settings are provided by the monitor. See the monitor directions for use.
3. Click
Move either end of the slider bar to the desired high or low limit.
Click and drag the center of the slider bar to move the entire range to the desired limits.
Click on the numeric boxes on either side of the parameters to manually enter a limit.
Edit
to open the Patient Details window and edit the patient information.
Device details 23