Reassign A Monitored Patient To A New Room In The Same Unit - Welch Allyn Propaq CS User Manual

Reassign a Monitored Patient to a New Room in the Same
Unit
If a patient is being monitored and you want to assign them to a new room in
the same unit, follow these steps.
1. From the Main Menu, press
Within a few seconds the Wireless Propaq CS displays a list of all
available rooms, including the patient's current room.
• If you decide not to change the patient's current room assignment,
press
Select
list).
• To assign the patient to a new room, scroll up or down to highlight
the room and press
• If you want to cancel the patient's current room assignment, but do
not want to assign a new room at this time, you can highlight Select
Room at Acuity and press
from the Acuity Central Station, or you can repeat this procedure
and assign a new room from the Wireless Propaq CS.
17
SETUP, ACUITY, CHANGE PATIENT, NEW ROOM
(the patient's current room is the default selection in the
.
Select
Select
. You can then assign the room later
.
Welch Allyn