Welch Allyn Connex Directions For Use Manual page 63

Central station

Hide thumbs Also See for Connex:

Table of Contents

Directions for use

7. This area displays the EarlySense sensor data.

Note

•

The EarlySense measurement displayed under the

○

•

The

device. See the device directions for use.

•

The

•

The timer next to the

Note

8. Click this button to open the Review window.

Alarm limits for the EarlySense sensor are set at the device. The alarm can only be dismissed at

the device. See the device directions for use.

0 – No motion

L – Low

M – Medium

H – High

EH – Extremely high

Exit sensitivity

graph indicates the bed exit sensitivity setting. This setting is controlled at the

SOURCE:

label indicates the EarlySense source.

TURN:

indicates the amount of time remaining before the patient's next scheduled turn.

If the patient turn reminder is active, the timer counts down to zero and then displays a reminder in

the System message area to perform and log a patient turn. If a scheduled patient turn remains

overdue, an alarm message appears in the System message area.

MOVEMENT

tile will be one of the following:

EarlySense sensor 57

Table of Contents