Settings; Patient Rest Mode - Welch Allyn Connex Directions For Use Manual

Settings

The main areas of the Settings window are a password-protected. These areas provide
customization of the system. For access information, contact your system administrator.

Patient rest mode

The patient rest mode enables you to turn the audio off at the device when continuous
monitoring is enabled and the device is communicating with a central station.
Patient rest mode can be enabled and disabled from the central station or from the
device.
Turn on patient rest mode for a covered area
1. Click the Settings icon in the Navigation area.
2. Click On.
3. Click OK.
The patient rest mode is activated on all devices in the covered area.
Turn off patient rest mode for a covered area
1. Click the Settings icon in the Navigation area.
2. Click Off.
3. Click OK.
The patient rest mode is deactivated on all devices in the covered area.
Turn on or turn off patient rest mode for an individual device
Patient rest mode for individual devices is controlled at the device. See the device
directions for use.
WARNING
Risk to patient safety. Set the volume as needed on the central station
considering the environment and ambient noise levels. When patient rest
mode is activated, the central station is the only source of audible alarms.
Verify that the alarm is audible to a clinician working at the maximum
distance from the central station.
69