Function Display - Icom IC-M220 Instruction Manual

■ Function Display

15
14
13
1 STATUS INDICATOR (p. 10)
• TX: Displayed while transmitting.
• BUSY: Displayed while receiving, or
the squelch is open.
2 POWER INDICATOR (p. 5)
• 25W: High power
• 1W: Low power
3 CHANNEL GROUP INDICATOR
(pp.7~8)
Displays the selected channel group, INT
(International), USA, CAN (Canada), WX
(Weather channel).
L The selectable channels differ,
depending on the version or presetting.
L When the WX-Alert is set to ON, "
displayed. (For only the USA version)
4 STATUS INDICATOR
• STBY: Standby mode.
• RT: Displayed when the channel
is changed while receiving or
transmitting a signal.
5 GPS ICON
• Displayed when valid GPS position
data is received.
• Blinks while no position data is
received.
6 MAIL ICON (p. 33)
• Displayed when there is an unread
DSC message.
• Blinks until one of the called messages
is read.
1 2 3 4 5 6 7
7 CHANNEL SWITCH ICON (p. 36)
Displayed when the "CH Auto SW" is set to
"Ignore after 10 sec." or "Manual."
8 LOCAL INDICATOR
Displayed when the RF Attenuation is ON.
(For only the USA version)
9 FAVORITE CHANNEL (p. 13)
Displayed when a Favorite channel is
selected.
10 CALL CHANNEL (p. 10)
Displayed when a Call channel is selected.
11 DUPLEX CHANNEL
Displayed when a Duplex channel is
selected.
" is
12 OPERATING CHANNEL NUMBER
(pp. 7, 11)
Displays the selected operating channel
number.
L "A" or "B" is displayed when a simplex
13 SOFTWARE KEYS FUNCTION
DISPLAY (p. 4 ~ 5)
The functions of each keys are
displayed. See "Software keys" on the
next page for details.
PANEL DESCRIPTION
8
9
10
11
12
channel is selected.
(☞Continued on the next page)
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
3