Recommendation - Icom IC-M220 Instruction Manual

■ RECOMMENDATION

CLEAN THE TRANSCEIVER AND MICROPHONE THOROUGHLY WITH FRESH
WATER after exposure to saltwater, and dry it before operating. Otherwise, the
transceiver's keys, switches and controllers may become unusable, due to salt
crystallization.
NOTE: If the transceiver's waterproof protection appears defective, carefully clean it
with a soft, wet (fresh water) cloth, then, dry it before operating.
The transceiver may lose its waterproof protection if the case or microphone is cracked
or broken, the microphone connector is not screwed in completely, or the transceiver
has been dropped.
Contact your Icom distributor or your dealer for advice.
■ KEY ICON DESCRIPTION
The keys are described in this manual as follows:
The keys that have an words or letters on them are described with the characters "[ ]".
Example: [MENU], [CLR]
The Software Keys are described with the words or letters on a dark background such
DISTRESS
as ENT or
Push the key below the desired function.
You can use the following keys on the Menu screen.
FUNCTION
Select
Enter
Go to the next tree level
Go back to the previous tree level Push [CLR],
Cancel
Exit
. The function of the keys are shown at the bottom of the display.
Push [▼] or [▲].
Push [ENT],
Push [ENT],
Push [CLR].
Push [MENU] or
ACTION
.
ENT
, or [►].
ENT
◄
BACK , or [ ].
.
EXIT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
ix