Icom IC-M220 Instruction Manual page 42

7
DIGITAL SELECTIVE CALLING (DSC)
D Receiving a Test call
When a Test call is received:
• An alarm sounds.
• "RCVD TEST CALL" is displayed.
ALARM OFF
1. Push
2. Push the Software Key below your next operation.
Ignores the call and returns to the operating
IGN :
screen.
(Ignore)
• The call is saved in the DSC Log.
• "
Sends a Test Acknowledgement "Able to
ABLE
:
Comply."
( Able to
• The call is saved in the DSC Log.
comply)
Accepts the call.
ACPT :
• Displays the received call's information.
(Accept)
• The call is saved in the DSC Log.
• The received call's information is
Push
Test Acknowledgement. (p. 25)
Push
32
to turn OFF the alarm.
" blinks continuously until you display
the call message.
displayed.
ACK , and then push
RESEND
to resend.
CALL to send a