Aquaquake Water Draining Function; Editing A Channel Name - Icom IC-M220 Instruction Manual

■ AquaQuake Water Draining function

Water in the speaker grill may muffle the sound coming from the speaker. The
AquaQuake Water Draining function removes water from the speaker grill by vibrating the
speaker cone.
CAUTION: DO NOT use the AquaQuake Water Draining function when an external
speaker is connected.
1. Push [◄] or [►] to display
AQUA
2. Hold down
• A low frequency vibration beep sounds to drain the
water, regardless of the volume level setting.
L This function is activated for a maximum of 10
seconds, even if you continue to hold down
3. Release the key to turn OFF the function.

■ Editing a channel name

You can edit the name of each operating channel and weather channel, using numbers,
uppercase letters, symbols, and a space. This enables easy recognition of the channels
or stations. All VHF marine channels are set with default names.
L You can edit channel names only when the "CH Close-up" is set to ON.
[MENU] > Radio Settings > CH Close-up
1. Push [▲] or [▼] to select the channel to edit.
2. Push [◄] or [►] to display
L You cannot edit a channel name during Dualwatch,
Tri-watch, or a scan.
NAME
3. Push .
• The "CHANNEL NAME" screen is displayed.
4. Edit the channel name.
FIN
5. Push to save the edited name and return to the
operating screen.
TIP:
• Push 123 to display numbers, or
• Select characters or space using [▲]/[▼]/[◄]/[►].
• Select "◄" or "►" on the screen to scroll.
• Push [ENT] to enter the selected character.
• Select "←" or "→" on the screen to move the cursor.
AQUA .
to turn ON the function.
NAME
.
!$?
BASIC OPERATION
AQUA
.
to display characters.
4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
11