Icom IC-M220 Instruction Manual page 26

7
DIGITAL SELECTIVE CALLING (DSC)
D Deleting an entered ID
(Example: Deleting an Individual ID: STATION 2)
1. Open the "INDIVIDUAL ID" screen.
[MENU] > DSC Settings > Individual ID
2. Select "STATION 2," and then push
• "Are You Sure?" is displayed.
OK
3. Push
CANCEL
L Push
• The selected ID is deleted, and then returns to the
previous screen.
TIP: You can edit an ID and its name by pushing
in step 2.
■ Entering the position and time
A Distress call should include the vessel's position, date, and time. If no GPS data is
received, manually enter the position and Universal Time Coordinated (UTC) time.
NOTE:
• The manual entry is disabled while valid GPS data is received.
• The manually entered position and time is valid only for 23.5 hours, or until turning
OFF the transceiver.
1. Open the "POSITION INPUT" screen.
[MENU] > DSC Settings > Position Input
2. Enter the latitude.
TIP:
• Select a number or a compass direction using [▲]/
[▼]/[◄]/[►].
• Select "←" or "→" on the screen to move the
cursor.
• Push [ENT] or
3. Enter the longitude and the UTC time.
L See the TIP in step 2 to enter.
FIN
4. Push
5. Push EXIT
• The "DSC Settings" screen is displayed.
16
to delete.
to cancel the deletion.
FIN
to save the selected number.
to set the entered position and time.
to return to the standby screen.
DEL
.
EDIT