Icom IC-M220 Instruction Manual page 37

D Sending a Position Reply call
Send a Position Reply call when a Position Request call is received.
If the Auto ACK function is set to "Auto," the Acknowledgement is automatically sent to the
calling station. (p. 36)
1. While a Position Request call is being received, push
ALARM OFF
to turn OFF the alarm.
2. Push ACPT .
• The received call's information is displayed.
3. Push ABLE to send an "Able to Comply"
Acknowledgement, or push
to Comply" Acknowledgement.
L If no valid GPS position is received, you can manually
enter the position and time in "Position" item on this
screen. See "Entering the position and time" on page
16 for details.
4. Push CALL to send the Position Reply call.
STBY
5. Push , and then
screen.
DIGITAL SELECTIVE CALLING (DSC)
UNABLE
to send an "Unable
OK
to return to the operating
7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
27