NetComm Wireless NF18ACV User Manual page 79

System
The System settings relate to your personalised settings on your NF18ACV. Use the tools in Configurations to make a back-up copy of your current settings or to retrieve and apply previously backed-
up settings. Alternatively you can reset all settings to the factory default settings.
Settings
VDSL/ADSL2+ Dual Band AC1600 Gigabit Gateway with VoIP – NF18ACV
UG01040 v 1.04 December 2018
To create a file containing all of your local NF18ACV settings select Advanced > System > Settings, then select
Settings button.
The backup configuration file will be saved to your browser's designated Downloads folder.
The backup configuration file will have a .conf file extension.
The default filename is: backupsettings.conf
We recommend that you give you backup settings file a meaningful name.
To use a previously saved backup settings file to reinstate those settings on your PC select Advanced > System > Settings, then select
Click the Choose File button and select a previously saved backup settings file (file extension .conf).
Then click the Update Settings button to over-write the current settings with the previously saved ones.
To restore the NF18ACV to its factory default settings, select Advanced > System > Settings, then select
Click the Restore Default Settings button.
A confirmation dialog will appear, click OK to restore the factory settings.
Note – All factory settings will be applied except your Username and Password which will remain as per any personal setting you have made.
Backup and then click the Backup
Update.
Factory Reset.
79 of 93
© NetComm Wireless 2018