Vdsl - NetComm Wireless NF18ACV User Manual

VDSL

VDSL (Very-high-bit-rate digital subscriber line ) technology
supports four CONNECTION TYPES:
PPPoE – The Point-to-Point Protocol over Ethernet.
Dynamic IP – IP addresses are assigned by the router.
Static IP – Users define IP addresses for each device.
Bridge – The device relies on the configuration of another
gateway on the connection.
VDSL/ADSL2+ Dual Band AC1600 Gigabit Gateway with VoIP – NF18ACV
UG01040 v 1.04 December 2018
PPPoE
Your ISP will advise you of your default PPPoE authentication
Username and Password. Normally you will be given the
opportunity to change these to be more secure.
VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier) are
commonly 8 and 35 respectively.
Static IP
VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier) are
commonly 8 and 35 respectively.
Contact your ISP for the WAN and DNS servers details.
Dynamic IP
VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier) are
commonly 8 and 35 respectively.
Bridge
VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier) are
commonly 8 and 35 respectively.
18 of 93
© NetComm Wireless 2018