Nf18Acv Default Settings; Restore Factory Default Settings - NetComm Wireless NF18ACV User Manual

NF18ACV default settings

The following tables list the default settings for the NF18ACV.
L A N ( M A N A G E M E N T )
Static IP Address 192.168.20.1
Subnet Mask 255.255.255.0
Default Gateway 192.168.20.1
Table 1 – LAN (Management) table
W I R E L E S S ( W I F I )
SSID (Refer to the included Wireless Security Card)
Security WPA2-PSK (AES)
Security Key (Refer to the included Wireless Security Card)
Wireless (WIFI) table
N F 1 8 A C V W E B I N T E R F A C E A C C E S S
Username
Password
NF18ACV WEB Interface Access table
VDSL/ADSL2+ Dual Band AC1600 Gigabit Gateway with VoIP – NF18ACV
UG01040 v 1.04 December 2018
admin
admin

Restore Factory Default settings

To permanently erase all custom user settings and
return to the factory default settings, click the Advanced
menu button and select
System group.
The Settings page will open.
Select Factory Reset and then click the Restore Default Settings button.
A confirmation message will display. Click OK to continue and the NF18ACV will shut down and reboot
using the factory default settings.
Close the web user interface and wait for 2 minutes before reopening your web browser.
When you next log in using the default Username and Password you will be prompted to run the first
time Setup Wizard.
Configurations from the
© NetComm Wireless 2018
25 of 93