Routing - Routing - NetComm Wireless NF18ACV User Manual

Routing – Routing
The Routing – NAT page contains two sections Static Route and RIP Configuration
Static Route
The Static Route table displays a list of the configured static routes.
Click the Add or Delete buttons to add or remove static route definitions.
I T E M
IP Version Select IPv4 or
Destination IP/Mask Enter the Destination Network Address or subnet mask.
Gateway
Enter the Gateway IP Address and/or an available WAN Interface.
Interface
Metric The Metric field is used to set a priority for this route, the lower the number the
higher the priority.
Delete Select a Static Route row in the table and click the Delete button to permanently
delete that Static Route definition.
Add button Click the Add button to create a new Static Route definition, see the Add Static
Route screen on right.
VDSL/ADSL2+ Dual Band AC1600 Gigabit Gateway with VoIP – NF18ACV
UG01040 v 1.04 December 2018
D E F I N I T I O N
IPv6.
Add Static Route
55 of 93
© NetComm Wireless 2018