Management - Tr-069 Client - NetComm Wireless NF18ACV User Manual

Management – TR-069 Client
TR-069 enables provisioning, auto-configuration or diagnostics to be automatically performed on your router if supported by your Internet Service Provider (ISP).
VDSL/ADSL2+ Dual Band AC1600 Gigabit Gateway with VoIP – NF18ACV
UG01040 v 1.04 December 2018
Select Enable WAN Management Protocol (TR-069) to display the TR-069 settings.
I T E M
Inform Set to enable to TR-069 client inform session initialization.
Inform interval Time in seconds that inform session data is sent to the Auto-Configuration Server (ACS).
ACS URL The address where the ACS server is located.
ACS User Name The user name to access the ACS server.
ACS Password The password to access the ACS server.
WAN Interface used by TR- The interface connection used to send and receive data to the ACS server.
069 Client
Display SOAP messages on
Select Enable to view the SOAP messages on a command prompt screen.
serial console
Apply/Save button Click to save your settings and start the TR-069 services.
Get RPC Methods button Click to retrieve Remote Procedure Call (RPC) Methods.
D E F I N I T I O N
© NetComm Wireless 2018
58 of 93