How To Clear The Fault Log - Baldor 22H series Installation & Operating Manual

Section 1
General Information

How to Clear the Fault Log

Action
Apply Power
Press DISP key
Press ENTER key
Press SHIFT key
Press RESET key
Press SHIFT key
Press ENTER key
Press Y or
key
Press ENTER key
MN722
Use the following procedure to clear the fault log and reset the internal clock.
Description
Display mode showing output
frequency.
Press DISP to scroll to the Fault
Log entry point.
Displays most recent message.
Fault log is cleared.
Scroll Fault Log Exit.
Return to display mode.
Display
Logo display for 5 seconds.
Display mode.
1=Most recent fault.
2=Second most recent fault, etc.
No faults in fault log. Also resets
the internal clock.
Comments
Troubleshooting 5-5