Cable Requirements - Bolin Technology VCC-8-4K20S-3SM User Manual

Cable Requirements


Network Cable: 10/100 Mbps Ethernet CAT
5/5E/6 UTP cables are applicable to the
ANSI/EIA/TIA-568A/B and ISO/D. Eight
wires in the network cable need to be inserted
in parallel into the top of the cable connector.
The cable connector needs to be crimped in
position. When the cable connector is in
position, ensure that the metal pieces of the
cable connector are parallel to each other and
the clamp of the cable connector is intact.

SDI Cable: For broadcast use,
Belden1694A/5CFB is a suitable cable to
transmit broadcast-quality video:
Conductor:
AWG Stranding
18 Solid
Shield Material
Type Layer
Tape 1
Braid 2
Nom. Capacitance
Conductor to shield
16.2 pF/ft
Material Nominal Diameter
Bare Copper 0.04 in.
Material
Aluminum / Polyester / Aluminum 100%
Tinned Copper
Nom. Inductance
0.106 µ H/ft
Coverage
95%
Nom. Char. Impedance
75 Ohm
9