Camera Diagrams; Camera; Extension Cable - Bolin Technology VCC-2HD10S-SN User Manual

Camera Diagrams

Camera

1. 12V DC Power Port
Connect the supplied AC power adaptor and cord.
2. Component Port for Extension Cable
Extension Cable provides RS-232 port, RS-422/485 port, IP, CVBS video output and audio input/output.
3. SDI Port
3G-SDI
4. Power LED Indicator
Turns green when the camera is connected to power outlet. When the power is turned on, it takes about 15 to 30
seconds to display the image after LED turns on.
5. IR Remote Controller Sensors
These are sensors to receive commands from infrared remote controller.
6. Lens
This is a 10X magnification optical zoom lens.
7. Communication LED Indicator
Flashes orange when the camera receives commands from the infrared remote controller.
8. Fix mounting holes
For original wall/ceiling mount bracket
9. Tripod mounting holes
10. Bottom DIP Switch

Extension Cable

11. Extension Port DVI-I(Connect to the camera body)
12. CVBS Video Output
13. RS232 Control Port
14. RS422/485 Control Port
15. 3.5MM Audio Input
16. 3.5MM Audio Output
17. Ethernet Port
7