Table of Contents
Advertisement
Perform the following operations:
1. Place an image of white subject (For example: A piece of white paper) in the center of the screen.
2. Press the HOME button of the infrared remote controller.
The one-push white balance adjustment is activated.
ATW (Auto Tracing White Balance): Auto Tracing White balance
(2000K to 10000K)
USER: This is a mode that enables you to manually set the control of R
and B gain up to 256 steps.
NOTE: When you select USER, R. GAIN (red gain) and B. GAIN (blue
gain) appear. You can select each item in the range from 0 to 255.
OUTDOOR AUTO: This is an auto white balance mode specifically for
outdoors. It allows you to capture images with natural white balance in the morning and evening.
SODIUM VAPOR LAMP (AUTO/OUTDOOR AUTO): This is an auto white balance mode specifically for
outdoors, which is compatible with sodium vapor lamps.
• SVL AUTO: Sodium Vapor Lamp Auto: This is an auto white balance mode that is compatible with sodium
vapor lamps.
• SVL: Sodium Vapor Lamp: This is a fixed white balance mode specifically for sodium vapor lamps.
• SVL OUTDOOR AUTO: Sodium Vapor Lamp Outdoor Auto: This is an auto white balance mode
specifically for outdoors, which is compatible with sodium vapor lamps.
PICTURE
The PICTURE menu is used to set the items related to the picture.
There are 2 menu selections regarding the PICTURE settings (PICTURE1 and PICTURE2). The PICTURE settings
begin in PICTURE1, and PICTURE2 is a continuation of the picture settings.
PICTURE1 Menu
SHARPNESS:
Picture sharpness value ranges from 0 to 15. You can
enjoy emphasized edge and high-resolution images.
FLIP:
Image E-Flipper – Used when ceiling mounting or
upright mounting. Set to OFF is upright mode, set to
ON is for ceiling mount.
MIRROR:
You can turn it ON to display the video reversely.
ND FILTER:
The ND Filter installed in front of the CMOS image
sensor can be engaged or disengaged by the
mechanical structure. The adjustable range of Iris and
shutter speed are increased by using the ND Filter.
COLOR:
You can configure the color gain from 1-15. Use this setting when bright color is particularly important.
HUE:
You can adjust color phase from 1-15.
NOISE REDUCTION:
Noise reduction - you can enjoy clearer images by removing unnecessary noise. You can select 6 levels from OFF (MIN),
1 to 5 (MAX).
STABILIZER
When the image stabilizer function is set to ON, you can obtain the image with less screen blur caused by shaking. The
correction effect can be achieved at the vibration frequency around 10 Hz. The image stabilizer function uses the digital
zoom method. Although there are changes in the angle of view and resolution, the sensitivity is maintained.
Note: The image stabilizer function may not work under the environment of high frequency vibration components. When
using the camera under such environment, set the image stabilizer function to Off.
STABLE ZOOM:
Stable Zoom is a function to perform correction using the image stabilizer function according to the zoom magnification
and zoom the image up to approx. 24× smoothly by combining the optical zoom with the digital zoom. By zooming the
image furthermore using the digital zoom, the image is zoomed up to 288× . On the wide side, the image without the
deterioration in resolution can be obtained because the digital zoom is not used. On the other hand, the correction effect
by the image stabilizer function is maximized on the tele side, reducing the blur.
OSD
>EXPOSURE
>WHITE BALANCE
>PICTURE1
>PICTURE2
>ZOOM
>SYSTEM
22
WHITE BALANCE: USER
WB MODE
USER
R GAIN
213
B GAIN
177
>
PICTURE1
SHARPNESS
FLIP
MIRROR
ND FILTER
COLOR
HUE
NOISE REDUCTION
2D NR
3D NR
STABILIZER
STABLE ZOOM
OFF
3
OFF
OFF
ND2
5
8
3
OFF
OF
ON
ON
Advertisement
Table of Contents
