Bolin Technology VCC-8-4K20S-3SM User Manual page 25


WD Parameter
VIDEO FMT (IP video output):
You can change the video format by adjusting this item. Select the item, press "←" button to choose the video format you
want to set to, then press "→" (Pressing "→" button changes value on some product models) or HOME button to confirm
it. After you confirm your choice, press HOME button again to restore it. The camera will reboot by itself. The new video
format is activated.
You can cancel it by pressing the MENU button.
The video formats that you can select from are: 2160p:29.97/25; 1080p:59.94/50; 1080i:59.94/50; 720p:59.94/50
You can select SDI video format are: 1080p:59.94/50/29.97/25/23.98; 720p:59.94/50.
SDI 1080p23.98 can be gained when Video FMT is set to 2160p:29.97/25.
SV (Software Version):
This item refers to the MCU firmware version that is currently running on the device.
25