Table of Contents
Advertisement
Adjusting and Setting with Menus
About On-Screen Menus
You can change various settings, such as shooting conditions and system setup of the camera, while observing menus
displayed on a connected computer screen.
This section explains how to read the on-screen menus before starting menu operations.
The menu parameters may vary according to the different product model numbers.
For a complete configurations menu, see "Menu Configuration" (page 24).
Bring out the OSD menu:
1. If you are using PELCO protocol keyboard, use preset 95# on the keyboard to bring up/exit camera OSD menu,
use joystick to navigate the menu.
2. If you are using VISCA protocol keyboard, find "Menu" button on the keyboard, press the button to bring up the
OSD menu.
Note
You cannot perform pan/tilt operations while the menu is displayed.
Main Menu
To display the main menu, press the MENU button on the supplied infrared remote controller.
1. Selected Items
Selects a setting menu.
The selected item is shown by the cursor. The cursor moves up or down by
pressing the "↑, ↓" button on the infrared remote controller.
2. Menu Items
To display a setting menu, select one using the "↑, ↓" button on the infrared
remote controller and press the HOME button on the infrared remote
controller.
Setting Menus
The setting menu selected on the main menu is displayed.
1. Setting Menu
The name of the setting menu currently selected is displayed here.
2. Selected Item
Selects a setting item.
The selected item is shown by the cursor.
Move the cursor up or down by pressing the "↑, ↓" button on the infrared remote controller.
3. Setting Items
The setting items for this setting menu are displayed. Select the setting item using the "↑, ↓" button on the infrared remote
controller.
4. Set Value
The currently set values are displayed.
To change a set value, use the "←, →" button on the infrared remote controller.
Note
In some product models, only use
you can use either "→" button or HOME button.
Control Button
You can select the item by pressing "↑, ↓, ←, →" and HOME button.
1. You can select a menu item by "↑, ↓" button on the infrared remote controller. The selected item is shown by the
cursor (Color change). You can change the value of the item by pressing "←, →" button.
2. You can move to the next layer by pressing the HOME button.
3. You can return to the normal display by pressing the MENU button.
Note
When you are operating the menu using the infrared remote controller, you cannot set IR- RECEIVE in the SYSTEM
menu to OFF. To set IR- RECEIVE to OFF, use the appropriate VISCA command.
"←" button on the infrared remote controller to change the value. To confirm the value,
19
Advertisement
Table of Contents
