Configuration - wtw inoLab pH/Cond Level 1 Operating Manual

4.7

Configuration

You can adapt the measuring instrument to your require-
ments. To do this, the following parameters can be changed
(the status on delivery is marked in bold):
Temperature probe that is used
for the pH measurement
Reference temperature
Representation of the measured
value as conductivity or resis-
tance
Temperature unit
Note
You can leave the configuration menu at any time. Parame-
ters that have already been changed are stored.
To do this, press the
1 Switch off the instrument.
2 Press and hold down the
e
3 Press the
The display test appears briefly on the display.
The instrument then switches automatically to the
setting of the temperature probe for the pH measure-
ment.
pH temperature probe,
LF temperature probe
20 °C, 25 °C
Conductivity, resis-
tance
°C, °F
m
key.
m
key.
key.
Operation
115