Commissioning - wtw inoLab pH/Cond Level 1 Operating Manual

Connecting the
plug-in power
supply (optional)
3

Commissioning

Note
You can adapt individual parameters to your requirements.
To do so, change the settings according to section
4.7 C
ONFIGURATION
The measuring instrument works battery-powered. It can,
however, also be supplied by the plug-in power supply
which is available as an accessory.
Warning
The line voltage on site must lie within the input voltage
range of the original plug-in power supply unit (see chapter
7 T D
ECHNICAL ATA
Caution
Use original plug-in power supplies only
(see chapter 7 T
ECHNICAL
1 Insert the plug (1) into the socket (2) of the pH meter.
2 Connect the original WTW plug-in power supply (3) to
an easily accessible mains socket.
.
).
D ).
ATA
3
Commissioning
2
1
83