4.4.3 TDS (total dissolved solids)
To measure the TDS, proceed as follows:
1 Perform the preparatory activities according to sec-
tion 4.4.
2 Immerse the conductivity cell into the test sample.
u d
3 Press the
the status line. The TDS value of the sample appears
on the display.
4 Press and hold down the
tor (0.40 ... 1.00) using
5 Wait for a stable measured value.
Note
Also refer to Application Report ... 084 K
D
ETERMINATION OF THE
key repeatedly until TDS appears in
g
and set up the TDS fac-
u d
.
T
D
OTAL
ISSOLVED
Operation
ONDUCTOMETRICAL
S
(TDS).
OLIDS
103