Network; Route - Robustel MEG5000 User Manual

Robustel MEG5000 User Guide
4.3

Network

4.3.1 Route

This section allows you to set the static route. Static route is a form of routing that occurs when a gateway uses a
manually-configured routing entry, rather than information from a dynamic routing traffic. Route Information
Protocol (RIP) is widely used in small network with stable use rate. Open Shortest Path First (OSPF) is made gateway
within a single autonomous system and used in large network.
Click to add static routes. The maximum count is 20.
Item
Index
Description
Destination
Netmask
Gateway
Interface
RT_UG_MEG5000_v.1.0.3
Description
Indicate the ordinal of the list.
Enter a description for this static route.
Enter the IP address of destination host or destination network.
Enter the Netmask of destination host or destination network.
Define the gateway of the destination.
Choose the corresponding port of the link that you want to configure.
Static Route
12 Dec, 2018
Default
--
Null
Null
Null
Null
wwan
79/150