Robustel MEG5000 User Manual page 57

Robustel MEG5000 User Guide
Item
Signal Strength
RSRP
RSRQ
Bit Error Rate
PLMN ID
Local Area Code
Cell ID
IMEI
Firmware Version
This page allows you to check the AT Debug.
Item Description
Command Enter the AT command that you want to send to cellular module in this
text box.
Result Show the AT command responded by cellular module in this text box.
Click the button to send AT command.
RT_UG_MEG5000_v.1.0.3
Description
Show the signal strength detected by the mobile.
Show the Reference Signal Receiving Power (RSRP) of the current network.
Show the Reference Signal Receiving Quality (RSRQ) of the current network.
Show the current bit error rate.
Show the current PLMN ID.
Show the current local area code used for identifying different area.
Show the current cell ID used for locating the gateway.
Show the IMEI (International Mobile Equipment Identity) number of the radio
module.
Show the current firmware version of the radio module.
AT Debug
Status
12 Dec, 2018
Default
Null
Null
--
57/150