Control Panel - Robustel MEG5000 User Manual

Robustel MEG5000 User Guide
3.4

Control Panel

After logging in, the home page of the MEG5000's web interface is displayed, for example.
Using the original password to log in the gateway, the page will pop up the following tab
Click the button to close the popup window. It is strongly recommended for security purposes that you change the
default username and/or password. To change your username and/or password, see 4.6.6 User Management.
Item
Save & Apply
Reboot
Logout
Submit
Cancel
RT_UG_MEG5000_v.1.0.3
Description
Click to save the current configuration into gateway's flash and apply the
modification on every configuration page, to make the modification
taking effect.
Click to reboot the gateway. If the Reboot button is yellow, it means that
some completed configurations will take effect only after reboot.
Click to log the current user out safely. After logging out, it will switch to
login page. Shut down web page directly without logout, the next one can
login web on this browser without a password before timeout.
Click to save the modification on current configuration page.
Click to cancel the modification on current configuration page.
Control Panel
12 Dec, 2018
Button
32/150