Robustel MEG5000 User Manual page 49

Robustel MEG5000 User Guide
Item
IP Pool End
Subnet Mask
DHCP Server for Relay
Gateway
Primary DNS
Secondary DNS
WINS Server
Lease Time
Static lease
Expert Options
Debug Enable
Multiple IP
You may click to edit the multiple IP of the LAN port, or click
click to add a multiple IP to the LAN port
RT_UG_MEG5000_v.1.0.3
Description
Define the end of the pool of IP addresses which will be leased to
DHCP clients.
Define the subnet mask of IP address obtained by DHCP clients from
DHCP server.
Enter the IP address of DHCP relay server.
DHCP Advanced Settings
Define the gateway assigned by the DHCP server to the clients, which
must be on the same network segment with DHCP address pool.
Define the primary DNS server assigned by the DHCP server to the
clients.
Define the secondary DNS server assigned by the DHCP server to the
clients.
Define the Windows Internet Naming Service obtained by DHCP
clients from DHCP sever.
Set the lease time which the client can use the IP address obtained
from DHCP server, measured in seconds.
Bind a lease to correspond an IP address via a MAC address.
format: mac,ip;mac,ip;..., e.g. FF:ED:CB:A0:98:01,192.168.0.200
Enter some other options of DHCP server in this field.
format: config-desc;config-desc, e.g. log-dhcp;quiet-dhcp
Click the toggle button to enable/disable this option. Enable for DHCP
information output.
LAN
to delete the multiple IP of the LAN port. Now,
12 Dec, 2018
Default
192.168.0.100
255.255.255.0
Null
Null
Null
Null
Null
120
Null
Null
OFF
49/150