Robustel MEG5000 User Manual page 44

Robustel MEG5000 User Guide
Item
Index
Type
Description
Connection Type
SSID
Connect to Hidden SSID
Password
IP Address
Gateway
Primary DNS
Secondary DNS
Enable
Primary Server
Secondary Server
Interval
Retry Interval
RT_UG_MEG5000_v.1.0.3
Link Settings (WLAN)
Description
General Settings
Indicate the ordinal of the list.
Show the type of the link.
Enter a description for this link.
Select from "DHCP" or "Static".
Enter a 1-32 characters SSID which your gateway wants to connect. SSID
(Service Set Identifier) is the name of your wireless network.
Click the toggle button to enable/disable this option. When gateway
works as Client mode and needs to connect any access point which has
hidden SSID, you need to enable this option.
Enter an 8-63 characters password of the access point which your gateway
wants to connect.
Static Address Settings
Enter the IP address with Netmask which can access the Internet,
e.g. 192.168.1.1/24
Enter the IP address of WiFi AP.
Set the primary DNS.
Set the secondary DNS.
Ping Detection Settings
Click the toggle button to enable/disable the ping detection mechanism, a
keepalive policy of the gateway.
Gateway will ping this primary address/domain name to check that if the
current connectivity is active.
Gateway will ping this secondary address/domain name to check that if
the current connectivity is active.
Set the ping interval.
Set the ping retry interval. When ping failed, the gateway will ping again
every retry interval.
WLAN Settings
12 Dec, 2018
Default
--
WLAN
Null
DHCP
router
OFF
Null
Null
Null
Null
Null
ON
8.8.8.8
114.114.1
14.114
300
5
44/150