Mitsubishi Electric MELSEC iQ-R Series User Manual page 84

IO device setting window
Set the IO device parameter.
Select the IO device display area in the network configuration settings.  [Devices]  [Properties]
■[General Configuration] tab
Set the parameters such as an IO device name and IP address.
Item
Name
Number
Link Parameters
Active Configuration
Comment
Addressing Mode
IP Address
3 GX Configurator-PN
82
3.1 Window Structure
Description
Sets a name to be managed in GX Configurator-PN.
*1
Sets an IO device ID.
Users can select an IO device ID from the list of IO device IDs that have not
yet been set.
Enables or disables the link of the IP address of an IO device and IO device
ID.
• Selected: Enabled
• Not selected: Disabled
Enable this item when the IO device ID needs to be linked with the station No.
(fourth octet) of the IP address.
Enables or disables the IO device setting of the RJ71PN92.
• Selected: Enabled
• Not selected: Disabled
Disable this item when the IO device setting needs to be deleted from the
RJ71PN92 with the setting in GX Configurator-PN held.
Displays the comment input field.
Information about the IO device is described with the default setting.
Sets a method of acquiring the IP address setting.
Selectable methods vary depending on the IO device. When the IO device
does not support a method, the method is not included in options.
• DCP: Sets the IP address specified in "IP Address" at the I/O data
communication start.
• DHCP: Sets the IP address of the IO device acquired from the DHCP server
at the I/O data communication start.
• LOCAL: Not supported in the RJ71PN92.
Sets the IP address of the IO device.
When a mode other than "DCP" is set in "Addressing Mode", the IP address of
the IO device may not match the specified IP address. Check the IP address
and change the setting as required.
Setting range
Up to 50 characters
(Default: Name of the current IO
device)
000 to 127
(Default: 4th octet number of the IP
address set as an IO device ID)
• Not selected
• Selected
(Default: Selected)
• Not selected
• Selected
(Default: Selected)
Up to 255 characters
(Default: Information about the
current IO device)
• DCP
• DHCP
• LOCAL
(Default: DCP)
1.0.0.0 to 223.255.255.255
(Default: IP address of the current IO
device)