Mitsubishi Electric MELSEC iQ-R Series User Manual page 80

"Channel Properties" window
Set the timer used for the PROFINET communications.
Perform the following actions to display this window.
Select "RJ71PN92" in the network configuration settings.  [Devices]  [Properties]
Item
 Send Clock Factor
DCP Request Time-out
Request Retry
RTA Request Time-out
Request Retry
RPC Client Maximum Number of Ping
Maximum Number of Resend
Time-out on CANCEL Request
Time-out on Fragment Acknowledge
Time-out Before Sending First Ping
Time-out Before Resending Ping
Server Maximum Number of Resending
Time-out Before Resending
 Description
*1 This item can be set when "Advanced Mode" is selected. ( Page 65 File)
3 GX Configurator-PN
78
3.1 Window Structure
Description
*1
Sets a send clock factor. The send clock factor is used to calculate
Refresh Period of each IO device. ( Page 86 [Parameters] tab)
Sets the timeout time of the DCP request. (Unit: s)
This value is set as the timeout of the DCP identification request.
Sets the number of resends after the timeout of the DCP request. (Unit:
times)
Sets the timeout time of the RTA request. (Unit: 100ms)
Sets the number of resends after the timeout of the RTA request. (Unit:
times)
*1
Sets the number of executions of PING during a wait for a response.
(Unit: times)
*1
Sets the number of resends of the RPC frame. (Unit: times)
*1
Sets the timeout time of the RPC cancel request. (Unit: ms)
*1
Sets the timeout time of the ACK request of RPC. (Unit: ms)
*1
Sets the timeout time of the PING execution of RPC. (First time) (Unit:
ms)
*1
Sets the timeout time of the PING execution of RPC. (Second time or
later) (Unit: ms)
*1
Sets the number of resends of the RPC message before detection of an
error. (Unit: times)
*1
Sets the waiting time before resending a message. (Unit: ms)
Displays the description of the selected item.
Setting range
1 to 128
(Default: 32)
1 to 65
(Default: 3)
0 to 65535
(Default: 2)
1 to 65535
(Default: 3)
3 to 15
(Default: 3)
2 to 10
(Default: 3)
2 to 10
(Default: 3)
100 to 10000
(Default: 1000)
100 to 10000
(Default: 2000)
100 to 10000
(Default: 2000)
100 to 10000
(Default: 2000)
2 to 10
(Default: 3)
100 to 10000
(Default: 2000)
