Mitsubishi Electric MELSEC iQ-R Series User Manual page 83

■[IP Address Manager] tab
This tab manages the IP address assignment to the connected IO devices on PROFINET.
When this setting is enabled, the IP address of each IO device is automatically assigned within the set IP address range.
To change the settings, select "Enable this Service".
Item
Enable this Service
Address Ranges
Sub-Network Mask
Gateway IP Address

Address Assignments
[Scan] button
Assignments
from Network
button
Configured
Assignments
*1 The network part of the IP address is determined by the IP address setting of the RJ71PN92. ( Page 52 Basic Settings)
*2 Characters from a to z, numbers from 0 to 9, "." (dot), and "-" (hyphen) can be used. "-" cannot be used at the beginning and end of the
name.
The name can be separated by ".". The number of characters in each separated part is limited to 63 or less.
Description
Enables the "IP Address Manager" setting when this item is selected.
Adds an IP address range.
When IO devices are added in the current network configuration settings, IP
addresses are assigned to them within this range.
Set the IP address range by using the following buttons.
• button: Creates a new address range.
• button: Edits the address range selected in the list.
• button: Deletes the address range selected in the list.
Displays the subnet mask of the RJ71PN92.
Displays the gateway IP address of the RJ71PN92.
Reserves IP addresses for IO devices.
This setting is used when the IP addresses of IO devices need to be fixed.
Searches the list of IO devices on PROFINET.
Clicking the [Scan] button searches IO devices on PROFINET, acquires
Device Name, MAC Address, and IP Address, and displays them.
Adds the list displayed in "Assignments from Network" to "Configured
Assignments".
Displays the information (Device Name and IP Address) of the RJ71PN92
and IO devices set in the [IP Address Manager] tab.
Set this item by using the following buttons.
• button: Adds an IO device name and IP address.
• button: Edits a selected item.
• button: Deletes a selected item.
Setting range
• Not selected
• Selected
(Default: Not selected)
*1
0.0.0.1 to 223.255.255.254
(Default: Refer to the following.)
• Beginning IP Address:
192.168.3.1
• End IP Address:
192.168.3.255



• Device Name: Up to 240 one-
byte alphanumeric
*2
characters
• IP Address: 0.0.0.1 to
*1
223.255.255.254
(Default: Refer to the following.)
• Device Name: rj71pn92
• IP Address: 192.168.3.3
3 GX Configurator-PN
81
3.1 Window Structure
3