Mitsubishi Electric MELSEC iQ-R Series User Manual page 91

Profinet io controller module
Hide thumbs Also See for MELSEC iQ-R Series:
Table of Contents

Advertisement

■[I/O Data] tab
This tab displays the I/O data status of the IO device.
This tab can be used when diagnostic mode is enabled. ( Page 67 Devices)
Item
Status
Output
Input
Data Description
Data Output Status
Data Input Status
*1 The actual I/O data information including IOPS and IOCS is displayed in "Output" and "Input". To check the output value and input value
excluding IOPS and IOCS, check the following buffer memory areas.
'Output data area' (Un\G31000 to Un\G35095)
'Input data area' (Un\G36000 to Un\G40095)
Description
Displays the connection status between the RJ71PN92 and IO device.
For detailed status, refer to the [Connection Information] tab. ( Page 88
[Connection Information] tab)
Displays output values of the IO device.
Displays input values of the IO device.
Not supported in the RJ71PN92.
Displays the status (APDU status) of the output (send) frame of the I/O data
exchange.
■Run/Stop
Displays the RUN state or STOP state of the IO device. When the RJ71PN92
is in the STOP state, IO device data cannot be sent and received.
■Data Valid/Data Invalid
Displays if the I/O data of the IO device is enabled or disabled.
When the data is disabled, the IO device stops the connection.
■Normal Operation/Problem
This tab displays the I/O data status of the IO device.
When the data has a problem, the IO device stops the connection.
Displays the status (APDU status) of the input (receive) frame of the I/O data
exchange.
For details, refer to the description of "Data Output Status".
*1
*1
Setting range
3 GX Configurator-PN
3.1 Window Structure
3
89

Advertisement

Table of Contents
loading

Table of Contents