Updating Profinet Labels - Mitsubishi Electric MELSEC iQ-R Series User Manual

2.5

Updating PROFINET Labels

When the IO device is registered and the item name is set in GX Configurator-PN, update global labels and structure related
to the RJ71PN92 and compile them in the engineering tool.
For item names of IO devices, refer to the following.
Page 91 List of items
Precautions
• When a setting of an IO device is added or changed in GX Configurator-PN, or the start I/O number of the RJ71PN92 is
changed in GX Works3, update PROFINET labels.
• Do not register global labels and structures with the following names since they are used when PROFINET labels are
updated. If they are registered, PROFINET labels cannot be updated. Check the names of global labels and structures, and
correct them if needed before updating PROFINET labels.
• Global label with a name starting with "Global_PN92"
• Structure with a name starting with "RJ71PN92"
• Structure with a name starting with "stSLV"
Procedure
1.
Select "Update PROFINET Label" in the engineering tool.
[Navigation window]  [Parameter]  [Module Information]  [RJ71PN92]  Right-click  [Update PROFINET Label]
2.
The global labels and structures related to the RJ71PN92 will be updated.
When the global labels and structure related to the RJ71PN92 do not exist, they will be newly created.
2 PARAMETER SETTINGS
60
2.5 Updating PROFINET Labels