Adjusting The Footplate; Adjusting The Knee Angle; Adjusting The Footplate Angle; Folding Up The Footplate - Otto Bock MPS Instructions For Use Manual

6.8 Adjusting the footplate
CAUTION
Incorrect entry over the footplate that is folded down
Falling, tipping over of the user due to user error
X Fold up the footplate before getting in�
CAUTION
Improper lifting by attendants
Tipping over, falling of the user due to lifting on removable components
X Attendants may lift the product only by welded or permanently attached components� It is particularly danger-
ous to lift the buggy by the footplate, push handle/push bar, lap bar or armrests�
6.9 Adjusting the knee angle
The knee angle of the footplate can be adjusted within a range of 0° to +90° as needed:
1� Open the adjustment lever (see Fig� 24)�
2� Adjust the knee angle�
3� Retighten the adjustment lever�
4� Prior to use, check the secure position of the footplate� To do so, press the footplate down�
Æ The knee angle must not change�
6.10 Adjusting the footplate angle
1� Loosen the screws (see Fig� 25) and set the desired angle�
2� Retighten the screws�
6.11 Folding up the footplate
The footplate can be folded up for transport�
1� Pull the release strap (see Fig� 26) and flip up the footplate�
MPS
24
25
Settings and use
26
Ottobock | 15