Download Print this page

Advertisement

Quick Links

User evaluation with
Myo Plus in 10 Steps
Quick Guide
Use the following steps to connect the Myo Plus system
to an iOS or Android app for user evaluation and training.
These instructions are intended for Myo Plus qualified O&P Professionals. Please see the
full course for detailed information on all features and functions.
Myo Plus

Advertisement

loading

Summary of Contents for Otto Bock Myo Plus

  • Page 1 Use the following steps to connect the Myo Plus system to an iOS or Android app for user evaluation and training. Myo Plus These instructions are intended for Myo Plus qualified O&P Professionals. Please see the full course for detailed information on all features and functions.
  • Page 2 (Apple App Store, or Google Play) Open the App • Turn on the Myo Plus Cuff by pressing the charging receptacle until • two short beeps and a green light appears Step 2 | Pair Myo Plus Cuff to your smart device...
  • Page 3 After 5 wrong login attempts, the account is locked for 30 seconds. • Step 4 | Myo Plus Cuff Set Up After login as clinician, the app automatically navigates to the clinician settings menu Choose a name of the prosthesis •...
  • Page 4 After adjusting the Clinician settings navigate to the menu Spiderplot/Training. To test connectivity to electrodes and confirm all 8 are functioning, tap each electrode set on the Myo Plus Cuff to confirm that patterns are created on the Spiderplot. Pattern Scaling Active feature enlarges the size of the patterns for easier viewing.
  • Page 5 Bild dazu Good Differentiation Poor Differentiation close hand open hand The number of necessary movement patterns depends on the planned prosthesis fitting e.g. a MyoBock hand with active rotation needs 4 patterns, • open/close/pronate/supinate 5 Ottobock | Myo Plus Quick Guide...
  • Page 6 TIP: Activate the Spiderplot in the recording circle, as shown below in step 5, to verify that no muscle activity is occurring during relaxation. 3. Preparation Phase Relax the Limb and prepare for the next indicated movement. 6 Ottobock | Myo Plus Quick Guide...
  • Page 7 When the Myo Plus Cuff is switched off the data will be erased from the cuff. The recorded sets are still stored in the Myo Plus App. If you intend to continue with the same patient you can create a set by...
  • Page 8 Show Spiderplot instead of MotionClass will change • the view for a better evaluation of actual contraction pattern. If the user can perform the movement patterns without major difficulty, you can continue with the basic set recording. 8 Ottobock | Myo Plus Quick Guide...
  • Page 9 On the cuff, open the button near electrode No. 3, • gently pull out the 2-poled cable attached to the Myo Plus TR processor and close the button again. Connect the 2-pole cable of the Myo Plus Cuff to the 2-pole •...
  • Page 10 Attention: Do not remove the cable tie! 2. Establish the connection It is important to switch the cuff on before starting the Myo Plus app. • Do NOT turn on the demo dome yet. Switch on the Myo Plus Cuff, you will hear 2 short •...
  • Page 11 Click on the grasp(s) to be added, then click on Continue to recording at the bottom of the screen. After recording, the following message will appear: Click “Accept” to keep, “Discard” to re-record. 11 Ottobock | Myo Plus Quick Guide...
  • Page 12: List Of Recordings

    Here you can adjust basic settings which are useful in daily use including: Speed of the hand and/or wrist rotator • bebionic control method • Glove donning mode active • Advanced Settings can also be accessed on the settings page. 12 Ottobock | Myo Plus Quick Guide...
  • Page 13 If you’re using your system to evaluate more than one potential user, be sure to reset the system back to manufacturer’s settings before testing a new user. Recordings cannot be stored and reloaded! You can inquire a Myo Plus Cuff loaner set through your local Ottobock contact. Additional information, including video tutorials, can be found on the Ottobock web site, YouTube, or by getting in contact with our technical support team.