Language; Display Brightness; About This Instrument - Fluke Calibration 5730A Operator's Manual

5730A
Operators Manual

Language

To select the display language used for the 5730A Calibrator UI:
1. Touch Setup Menu>Instrument Settings>Language.
2. Touch the necessary language from the screen. The choices are:
The new language does not take effect until the Calibrator is powered down
and back up again. Push  on the front panel.

Display Brightness

To adjust the brightness of the display:
1. Touch Setup Menu>Instrument Settings>Display.
2. Touch the field in the Brightness selection and enter the necessary value with the

About This Instrument

About this Instrument in the setup menu gives access to this information:
•
•
•
Much of the information is summarized in this menu. Touch Software Information to
get more detail about the installed firmware. Touch Hardware Information to get more
detail about installed assemblies and attached auxiliary amplifiers.
4-58
•
English
•
French
•
Spanish
•
Simplified Chinese
•
Japanese
•
German
•
Portuguese
•
Russian
•
Korean
numeric keypad. Note that with brightness setting of 0 %, the display is still visible.
Installed internal operating software revision letters.
Whether the Wideband AC Module (Option 5700A-03) is installed.
Which auxiliary amplifiers are attached, if any.
To view this information, touch Setup Menu>About This Instrument.
Note