Explanation Of Messages Display On Screen - Ikegami HTM-1505R Operation Manual

HTM-1505R/HTM-1505CS
4.12 Explanation of Messages Displayed on Screen
Jt'.f'.f:z:
1
ltt1
liir~l .... ,·•· ;;; ·· t?'.i.\,;,·\\,:t'<~:£,'.
•?i:-;;t',.···
-'-·;ff!:tJ{:it
'/N'.?
<',•
.,::f;;c·. 6 ~·
,,
-°'?J::)"''c;(:;'
:.~\Y?'V :~
•'f 1.• ·::;~_ ·- :,::• ,. , • :: •
1
~~1-:1-~-,~~'.",~,~?
-=~---:"{,~:i.\·.;·,; .•. ..,. -~ -~-~-,,,~_
•p
'"''"'
.,.
Cause: Displayed in lock-mode (refer to 4-11(7)), or FILE I, FILE2, or FILE 3 switch is pressed.
ALL LOCK
Countermeasure: Undo the lock mode (UNLOCK) and then operate again.
Cause: Displayed when CHANGE PRESET switch or each STORE FILE is pressed with lock mode
&FILE LOCK
(refer to 4-11-(7)) set to PRESET FILE.
Countermeasure: Undo the lock mode (UNLOCK) and then operate again.
Cause:
CHANGE PRESET--->ON
Displayed, when each PRESET switch is pressed with CHANGE PRESET switch turned off.
Countermeasure: Tum on CHANGE PRESET switch and then operate again.
Cause: Displayed, when each PRESET switch is pressed with CHANGE PRESET switch turned on.
CHANGE PRESET--->OFF
Countermeasure: Turn off CHANGE PRESET switch and then operate again.
Cause:
DELAY--->OFF
Displayed, when BRIGHT PRESET switch is pressed in delay mode.
Countermeasure: Cancel delay mode and then operate again.
Cause: Displayed, when APT PRESET switch is pressed with APR switch turned off.
APT--->ON
Countermeasure: Tum on APT switch and then operate again.
Cause:
Displayed, when CHANGE PRESET switch is pressed with FILE I to FILE 2 ready for
STORE FILE
selection (blinking) with STORE FILE switch.
Countermeasure: Press STORE FILE switch to cancel the ready status (blinking) and then operate again.
Cause:
Displayed, when PRESET switch is pressed wit? each manual voJume control set to manual
MANUAL--->OFF
mode.
Countermeasure: Select preset mode and then operate again.
Cause:
Displayed, when CHANGE PRESET switch is pressed with menu displayed.
MENU--->OFF
Countermeasure: Preset data cannot be changed with menu displayed.
Tum off menu display and then operate again.
Cause:
Displayed, when operation is wrong and no function is provided.
NO OPERATION
Countermeasure: Recheck operating procedure and then operate again.
ENTER CORRECT
Cause:
Displayed, when lock mode of MENU 5 is already set and wrong password is entered.
PASSWORD
Countermeasure: Check password and enter again.
<"'.
Cause:
This mark is indicated, when voltage of lithium cell of MPU BOARD for data backup begins to
~
z
I
lower.
7
Countermeasure: Change battery immediately. For how
to
change, refer to service manual.
47