Safety Precautions - Ikegami HTM-1505R Operation Manual

1':
Safety Precautions
For safe and correct usage
Thoroughly read the "Safety Precautions" and the operation manual
before using the unit.
Keep them carefully after reading and use as ready reference.
Pictorial Symbols
The "Safety Precautions" and markings on the product contain various
pictorial symbols to assure the safety use of the product and prevent an
injury to you and other persons as well as property damage.
As each symbol has the following meanings, thoroughly understand
them before using the unit.
Please note that some precautions may not be applicable to the
product that you purchased.
Indicates a potentially hazardous situation
t
WARNING: that may arise due to improper handling by
ill
taking no notice of this symbol and could
result in a serious iniurv or death.
Indicates a potentially hazardous situation
t
CAUTION: that may arise due to improper handling by
ill
taking no notice of this symbol and could
result in an injurv or property damage only.
[Note] 6,. means a heads-up.
Exam oles of symbols
Symbol"(!}' means a prohibited·action.
The content of prohibited matter is mentioned near or in
the figure. (The figure on the left side represents "Caution
· for disassemblina".
Symbol
"l::i;"
means a mandatory or directive content.
Practical precautions are shown in the figure. (The figure
on the left side represents "Pull out power plug from plug
outlet.")
Lh
CAUTION
When using the unit·
0
Do not place a receptacle containing water or a small
metallic piece on the unit!
If water spills in the unit, a fire or electric shock may be
caused.
0
Do not use other power supply voltage than specified I
A fire or electric shock may be caused.
0
Do not put a metal body or flammable material into
the opening of the unit!
Do not drop in such material! A fire or electric shock
mav be caused.
@ Do not make alterations to the unit!
A fire or electric shock may be caused.
When installinQ the unit:
0
Do not set the unit in an unstable place!
It may drop or turn down, causing an injury.
0
Do not connect to any other equipment than specified!
A fire or electric shock may be caused.
When fixing the unit, ask a professional contractor!.
When fixing the unit, do so in accordance with the
ill specified procedure; otherwise it· may drop or turn
down, causing a fire, electric shock or injury.
Especially when fixing it to the wall or ceiling, be sure
to ask a professional contractor.
When an abnormal state occurs·
If the unit produces smoke, gives out a foul smell or
ill
produces an abnormal sound, turn off the power
switch immediately and pull out the power plug!
~
If the unit is used as it is, a fire or electric shock may
be caused. Check that no smoke is produced, and
then contact the dealer or sales representative.
ill
If water or foreign matter enters the. unit, turn off the
power switch and pull out the power plug!
~
If the unit is used as it is, a fire or electric shock may
be caused. Check that no smoke is produced, and
then contact the dealer or sales representative.
ill
If the unit is dropped or the case is broken, turn off
the power switch and pull out the power plug!
~
If the unit is used as it is, a fire or electric shock may
be caused. Contact the dealer or sales representative.
ill
If the unit fails to operate properly, tum off the power
switch and pull out the power plug!
~
If the unit is used--asitis; a fire or electric shock may
be caused. Contact the dealer or sales representative.
Do not use any damaged power cord (exposed core,
ill
broken wire, etc.)!
If the unit is used as it is, a fire or electric shock may
be caused. Contact the dealer or sales representative.