Ikegami HTM-1505R Operation Manual page 35

13. ROTATE
Used to correct the deviation of PURITY that occurs due to the in-
fluence of earth magnetism when the direction of monitor is changed.
Make the whole screen unifo1mly monochrome by means of
SCREEN key.
When using the monitor in a relay car or similar situation where the
direction of the monitor always changes, set elbit connector (EL 561)
of DEF board to OFF position to make the rotation circuit inoperative.
It has been set to "ON" at the time of facto!)' shipment.
When there is partial color
~---+----t~W
difference, correct so that the
whole screen may be unifonn.
@ ENT key (for PRESET screen)
To display the preset screen by means of CHANGE PRESET key
and WHITE BALANCE key and select an item to be changed,
press this switch.
As ENT key is a double-push key to prevent an operation mistake,
press it in the order of
CD->®.
For details of how to use preset screen refer to 4-8.
[How to select a preset item]
WHITE
~
Press 5 times.
(t !keys can also be used.)
Charge data with
t
!
keys.
Displays the present level.
REMO1
<l'lli I TEBALANCE>
1. R. BACKGRROUND
J,,,,,,
G. BACKGRROIJND
l.VB-
BACKGRROUND
4. G. GAIN
5. B. GAIN
REMO!
-
[How to enter preset data]
After completion of data
'°'
ENT
(j)
~
o:;push
REMO!
SAVE -, (ENT) (STORE)
UNDO -, (ESC) (CLEAR)
52. 1%
I\:_
Display e,esent level
<Data entry> <Return data.>
~~F
REMO! REMO!
STORE DATA! CLEAR DATA!
HTM-1505R/HTM-1505CS
@
CLEAR key (for PRESETscreen)
To display the preset screen by means of CHANGE PRESET key and
WHITE BALANCE key and select an item to be changed or clear
data, press this switch.
When the key is pressed while preset data is being changed, it is
possible to clear the data being changed and return it to the former data.
@ ! f
key
(for PRESETscreen)
Display the preset screen by means of CHANGE PRESET key and
WHITE BALANCE key, and move the blinking number with
!
j
keys.
It is possible to move the blinking number by pressing CHANGE
PRESET mid WHITE BALANCE keys, as well.
.AT key
To change the contents on the right side of MENU screen or the data
of preset screen, press these keys.
31