Htm-1550Cs - Ikegami HTM-1505R Operation Manual

HTM-1505R/HTM-1505CS
(2) HTM-1505CS
Notes
Insert the module in a slot specified in the following Fig.:
Insert option modules in slots 2 to 4.
(This Fig. shows an example of mounting. If these modules are already mounted in the product you purchased, no mounting is required.)
Slots I and 5 are fixed modules and they cannot be inseited in other position than this position.
When mounting a module, remove the blank panel beforehand.
Firmly fix with the upper and lower screws (2 pcs) of the module.
If the screw is loose, the module will come off or contact failure of the connector will occur.
DK-801
DK-802N
DK-8012
DKM-501A/B
DKllll-501*AV
DKM-501*AVD
DE-801
DE-802
DCH-501
DKM-501AV
OKM-501AVD
'Nultiber'ofslots.'·.••
4:2:2 Digital component module
4Fsc Digital composite module
4:2:2 Digital module
Multi format digital module
(Ditto) W/embedded analog audio
2
(Ditto) W/embedded digital audio
2
NTSC 3 line COM decoder module
PAL COM decoder module
Dual component module
MPU module
Fixed module of slot I. It cannot be inseited into other slot.
VIDEO PROCESS module
Fixed module of slot 5. It cannot be inserted into other slot.
Module set screw
Firmly fix at 2 positions (upper and lower positions).
5.?L-------------'>===·
49