Ikegami HTM-1505R Operation Manual page 34

HTM-1505R/HTM-1505CS - ..
t · -
f
• Item can be moved by means of WHITE BALANCE key and! j key.
· For how to enter/change data, refer to 4°8.
· For how to adjust white balance. refer to 4-10 (3).
WHITE
F3
REM01
<WH I TEBALANCE>
1. R. BACKGRROUND
2. G. BACKGRROUND
3. 8. BACKGRROUND
4. G. GAIN
5. B.GAIN
Explanation of each item on <white balance> menu
1. R.BACKGROUND
Used to adjust the white balance (red component) oflow light po1tion.
2. BACKGROUND
Used to at~just the white balance (green component) oflow light po1tion.
3. B.BACKGROUND
Used to adjust the white balance (blue component) of low light pmtion.
4. G.GAIN
Used to at[just the white balance (green component) of highlight pmtion.
5. B.GAIN
Used to adjust the white balance (blue component) of highlight po1tion.
@
CHANGE PRESET key
30
To change preset data (13 items), press this key.
Item can be moved by means of CHANGE PRESET key and! j keys.
For how to enter/change data, refer to 4-8.
REM01
~
NGE PRESET>
UE 9 V. CENT
HROMA 10 HEIGHT
3 BRIGHT 11 TRAP
4 CONT 12 SIDE P
5 APT 13 ROTATE
6 H. PHASE
7 H. CENT
8 WIDTH
Each preset data has the following individual data:
Table 5-3-1 List of Each PRESET DATA
PRESET FILE
FORMAl
SCAN
Nciriibefof.data
HUE
e
X X 4
CHROMA
BRIGHT
HEIGHT•·
WIDTH
H.CENT
V.CENT
H.PHASE
ROTATION
APT
• •
• •
•
X
X
X
X
X
X
X
X
X
X
X
X
• •
•
•
•
•
X
X
X
X
X
X
• •
X
X
X
X
X
·-•· X X X
FILE:
FORMAT:
REFERENCE, FILE
I.
FILE 2, FILE 3
525i. 625i, I 035i. I 080i. 720p(Type-1)
4
4
4
4
4
14 (17)
14 (17)
4 (5)
4 (5)
4 (5)
4 (5)
SCAN:
( )
:
4 : 3nonnal. 4 : 3under, 16: 9nonnal, 16 : 9under
Number of data for Type-I
* Do not change SCAN and chrnmel while changing each preset data.
53 ¥
Explanation of CHANGE PRESET item
1. HUE
· Used to adjust hue data
IB
· Circuit operates only when analog/digital (02) NTSC composite signal
input equipped with NTSC decoder module DE-80 l is selected.
· For how to adjust, refer to 4- IO ( 4 ).
2. CHROMA
· Used to adjust chroma data.
· For how to adjust, refer to 4-10 (4).
3. BRIGHT
· Used to adjust brightness data.
· It does not operate in DELAY mode.
· For how to adjust, refer to 4-10 (I).
4. CONT
· Used to adjust contrast data
• For how to ac[just, refer to 4-10 (2).
5.APT
· To correct aperture, turn it on.
· For SDTV format signal ofYPbPr/RGB input and D l format signal of
SD-SDI, the ape11ure function does not operate.
6. H.PHASE
Used to adjust the horizontal phase of image.
Indicate I 00% mrn·ker and ac(just so that
image may come witl1in I 00% of the frame.
7. H.CENT
Used to adjust the horizontal position of
the available picture area
8. WIDTH
Used to adjust the width ofavailable screen
area for each scanning size and aspect.
9. V.CENT
Used to adjust the ve1tical position of the
available picture rn·ea.
10. HEIGHT
Used to adjust the height of available
screen area for each scanning size and
aspect.
11. TRAPE
• Used to adjust TRAPEZOIDE (trapezoidal
distmtion) on either side.
12. SIDE.PIN
· Used to adjust SIDE PIN (pin-cushion
distortion) on either side.