Howto Mount Optional Equipment; Option Module; (I) Htm-1550R - Ikegami HTM-1505R Operation Manual

HTM-1505R/HTM-1505CS
R l
j
5. Howto Mount Optional Equipment
5.1 Mounting an Optional Module
48
(1) HTM-1505R
Notes
lnse1t the module in a slot specified in the following Fig.:
lnse1t option modules in slots 2 to 4.
(This Fig. shows an example of mounting. If these modules are already mounted in the product you purchased, no mounting is required.)
Slots I and 6 are fixed modules and they cannot be inserted in other position than this position.
When mounting a module, remove the blank panel beforehand.
f'irmly fix with the upper and lower screws (2 pcs) of the module.
If the screw is loose, the module will come off or contact failure of the connector will occur.
DK-801
4:2:2 Digital component module
DK-802N 4Fsc Digital composite module
DK-8012 4:2:2 Digital module
DKM-501A/B Mulyiformat digital module
DKM-501*AV (Ditto) W/embedded analog audio 2
DKM-501*AVD (Ditto) W/embedded digital audio
2
DE-801 NTSC 31ine COM decoder module
DE-802
PAL COM decoder module
DCH-501
Dual component module
MPU module
Fixed module of slot I. It cannot be inse1ted into other slot.
VIDEO PROCESS module
Fixed module of slot 6. It cannot be inserted into other slot.
~
SERIAL
YCHA
~@
~
□
!··
D
Module set screw
Firmly fix at 2 positions (upper and lower positions).
©