Display Setting Screen - Ikegami MLM-1582C Instruction Manual

5. Operation

5.6 Display Setting Screen

This screen is used to make the input signal display aspect ratio, horizontal and vertical
display positions and sizes, and other settings.
Screen display
Display setting screen description
• Aspect:
• Over Scan:
• H/V. Position: Used to adjust the horizontal and vertical positions onscreen.
• H/V. Size:
• Clock:
Used to switch the video signal aspect ratio from Normal, Full and
Clear. The switchable types depend on the type of input signal.
Used to select the display size with an overscan of 10% or 20%.
Move toward the plus side to shift the screen to top right.
Move toward the minus side to shift the screen to bottom left.
Used to adjust the horizontal and vertical sizes onscreen.
Move toward the plus side to enlarge the display size.
Move toward the minus side to reduce the display size.
Adjusts the number of sampled dots for analog signals other than
VIDEO/S-VIDEO and DVI signals.
Increase the setting to get the sampling frequency higher. Decrease
it to get the sampling frequency lower.
Make this adjustment if vertical stripes or noises occur.
12